Basic Info.
System Supported
Corrugated Board
After-Sales Service Provided
Engineers Available to Service Machinery Overseas
Printing Interface
USB3.0
Applicable Material
Paper
Automatic Grade
Automatic
Color & Page
Multi-Colour Printing Press
Structure
Rotary Type Printing Machine
Feeding Type
Automatic Feeding
Adjustment of Phase
Automatical Adjustment by PLC
Max. Sheet Size
1200X2000mm
Max. Printing Size
1200X1850mm
Min. Feeding Size
300X550mm
Anvil Cover Brand
Germany Depair / Taiwan Maxdura
Printing Roller Diameter
393.6mm
13.Tprinting Anilox Roller
216mm
Transport Package
Wrapped with Film or in Wooden Case
Specification
1200x2500mm
Product Description
YFS-E336-2500 Fully vacuum suction type flexo printer glazer dryer slotter rotary diecutter stacker with servo motor
Specs. | Unit | Model 2500 |
Inner wallboard width | mm | 2450 |
Max. Paper size | | 1055X2500 |
Max. Diecutting area | mm | 1055X2450 |
Max. Paper size (skip feeding) | mm | 1200X2500 |
Max. Printing area | mm | 980×2400 |
Min. Paper size | mm | 350X600 (complete sheet printing) |
Thickness of printing plate | mm | 7.2 |
Design speed | sheets/min | 250 |
Economic speed | sheets/min | 150-200 |
Main motor power | KW | 45 |
Total power | KW | 240 |
Weight | T | |
Overdye precision | mm | ±0.75 |
Slotting/diecutting precision | mm | ±1.5 |
Dimensions | mm | 15500X5200X3000 |
I. Complete performance 1.
The wallboard is 60mm thick wrought iron, after deal with the internal stress then processed with CNC machining center.2. Painting technology: the parts will be treated with the procedure derusting-phosphating-paint spraying-stoving varnish to make the painting with rust proof,hard surface, and durable.
3. The complete machine with alarm bell, will be always warning in the walking time, can keep the worker safe. Each unit equipped with emergency switch inside, can stop each unit moving inside to assure the inner operator safe.
4. Spraying lubrication with dual oil pump automatic circulatory system, oil level balancer to keep the oil level balance.
5. The stored orders in the computer system can reach 999 (Main controlled computer on the slotter operation side).
6. All the draught fans for main motor, feeder, printer, glazer, drier units adopt frequency converter to control the air volume, adjust more exactly, make sure the feeding smoothly, can save more electricity and cost.II. Feeding part (1unit)Machine table - Adopt PLC,touch screen multifunction control, reliable system, low failure rate, easy to operate, can set the pcs, when finished will stop automatically.
- This machine has the auto zero,auto register, memory recover, skip feeding, auto lift up and down the printing plate functions,etc.
- Pneumatic interlocking device.
- Main frequency motor, inverter control, save energy, start steadily, equipped with motor start protector.
- Switch on feeding part and die-cutting part interlocked, easy operation.
Dust-extraction device
Three rows brush on the feeding unit and the powerful suction dust removal device, remove the impurity on the paper, to improve the printing quality.Automatic zero resetting device1. Feeding unit, printing unit, die-cutting unit, all automatic zero resetting by computer.
2. Usually use the auto resetting device preset position function, can overprint to the probable position automatically, test two pcs can adjust to the right position, reduce the waste of paper.
Drying device
After each unit printer all equipped with air knife drying device. Avoid the colors mixed, improve the printing quality and speed. III. Printing part(5 units) Printing roller ( Printing plate roller) - Outer diameter ¢321.6mm(with printing plate diameter ¢336)
- Fixed ratchet wheel type roll shaft.
- Full printing plate with groove, suitable to 9x3mm printing plate strip. Can increase half printing plate groove.
- Fast install and dismantle printing plate, control the positive and negative rotation by foot pedal electrically.
- Gap of anilox rollers are adjusted by electric, show the position by touch screen.
Closed chamber doctor blade system
- Adopt pneumatic power to recycle directly, fast recycling and cleaning.
- Unique doctor blade installation method, convenient to change doctor blade, exact positioning, to reach the best ink distribution effect.
- Air pressure type positioning, automatically compensation of the blade abrasion.
- Adopt dual layers ink cover, will not ooze ink.
- Equipped with auto ink cleaning function, can shorten the cleaning time, also assure the ceramic roller printing will not be burnt.
Vacuum suction feeding platform
1. Vacuum suction type ceramic wheels feeding, blast capacity can be adjusted as per different paper size in different section.
2. Variable frequency fan control the blast capacity, save energy, feeding smoothly.
3. Linear guideway control the lifting of air bellow, improve the printing precision.
4. The platform height with quadrangle orientation, more steady in high speed running. Ceramic roller 5units (Jiangsu Haili) 1. High quality thick wall seamless steel pipe with ground ceramic cobwebbing engraved by laser.
2. Printing ceramic roller mesh number 600LPI x 4units, 450LPI x 1unit (or as per customer need). 3. Has more meticulous and exquisite printing effect, wear-resistant, longer lifetime. 4. Equipped vapour pressure type lifting device on the feeding system (When feed in paper, anilox roller descend to touch the printing plate; If stop feeding, anilox roller will rise up). 5. Adopt wedge block type overrun clutch, faster ink distribution and ink cleaning. IV. Cross bridge drying part (1unit wider for option) 1. Independent vacuum suction transmit, assure the transmission precision. 2. Axial flow fan assist drying. 3. Linear guideway control the bellow lifting, more steady in high speed running.
4. Adapt to printing, slotting, die-cuting,high matching.V. Computerized slotter part (1unit) 1. Single shaft double knives slotter. Adjust the carton height by internal gear structure, will not easy to contaminate the carton. 2. Creasing shaft, pre-pressing shaft diameter is Ø110mm, thick walled tube, After the pre-pressing, cardboard is not easy to burst. 3. Above crease wrapped with rubber, will not damage the cardboard. 4. The adjustment of creaser and pre-creaser adopt self-locking structure, range is 0~11mm. 5. Adopt smooth lead screw with linear guideway to adjust the slotting shaft, the movement more flexible and exact. 6. Slotting carton height adjusted by computer and electrical digital adjustment.
7. Equipped with stripping device on the die-cutting unit, all the scraps and deckle edge of paper will be lead out of machine.
VI. Die-cutting part (1unit for option) Creaser and pre-creaser
1.
Creasing wheels outer diameter is 180mm, after two times pre-creasing the paper will not easy to break. 2. Above creasing wheels wrapped with rubber will protect the paper not to break.
3. Creasing wheels, pre-creaser position transverse movement by electric.
4. Electrical adjustment of the gap between creaser, pre-creaser, die-cutting rollers, range is 0~11mm, touch screen shows the position. 5. Equipped with anvil blanket repairing device, can repair 3~5times, can use the anvil blanket repeatedly, Anvil blanket shaft (above roller)
1.
Anvil blanket roller material is high quality steel,with surface grinding, hard chrome plating, balancing and correcting, can improve the stability in running. The blanket is helical reversing by mechanism,can move 35mm transversely. 2. Paper guiding rollers' gap adopt self-locking structure, range is 0~12mm. The drive of paper leading rollers use cross coupling, reduced the attrition to assure the steady driving.
3. Phase adjust device adopt planetary gear structure. Die-cutting phase adopt computer and electric digital control with 360° adjustment (in running and stopping both can be adjusted). In transverse, adopt NC and electric digital control, range is ±10mm.
4. Anvil blanket roller compensation adopt differential clutch, assure the die-cutting size right. Anvil blanket repairing device to keep the blanket smooth.
Address:
East of 104 National Road, 1.5km from South of Dongguang County, Hebei Province.
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Bags, Cases & Boxes, Industrial Equipment & Components, Manufacturing & Processing Machinery, Packaging & Printing
Company Introduction:
SOOME MACHINERY specializes in developing and manufacturing fully automatic, high speed, precise and of good quality packaging machines on a track of benign development. Now there are three huge workshops and one office block with 3 floors over 21, 000 standing tall and up bright along national highway.
Sticking with mechanotronics, intelligent operation, simple usage, energy conservation and environment protection which are our workers′ corporate philosophy facing the fierce competition in corrugated packing field is to keep up with the high pace of modern life.
We put our hearts in our mind to make no effort equipping each product. Especially we developed several new high speed automatically machines which improved the competition ability of our customers, also got the recognition of thousands packing companies from domestics and overseas based on the principle of honest and trustworthy.
Our products find a good sale in Argentina, Russia, India, Italy, Germany, Egypt, Vietnam, Spain, Iran, America, Thail
And, Turkey and so on. Anyone who cooperates with us is proud of our good after service and open-minded attitude. Welcome foreign customers visiting our company and wish we us unite in a concerted effort for the beautiful future!